SikaGrout-110 AN is a precision-engineered, rapid-setting cementitious grout designed to deliver reliable structural support in anchoring, machinery grouting, and equipment installation applications. Engineered for demanding construction environments where high early strength is critical, this single-component formulation provides consistent performance and long-term durability. With excellent pourable consistency, it easily fills clearances from 1/4 inch and above beneath baseplates, anchor bolts, or structural supports — requiring only the addition of potable water for installation.
This grout reaches 1,500 psi compressive strength in just 1 hour and achieves full structural capacity of 8,000 psi at 28 days, helping reduce project timelines and costly delays. Its shrinkage-compensated formula and bleeding-free cure ensures alignment integrity and dimensional stability over time. Ideal for fast-paced construction and maintenance operations, SikaGrout-110 AN simplifies installation while maintaining industry-grade mechanical performance under normal structural loading conditions.
✨ Looking for a different cement grout?
We’re here to answer all of your questions about cement grout, or any of the other products we carry.
Key Features of SikaGrout-110 AN
Rapid Strength Development
Achieves 1,500 psi compressive strength in 1 hour; full cure reaches 8,000 psi at 28 days.
Simple Water-Only Mixing
Requires only potable water addition for proper consistency — no complex mixing ratios or additives needed.
Excellent Flow Characteristics
Self-leveling and pourable consistency for easy placement under tight clearances and complex geometries.
Shrinkage Compensated Formula
Reduces stress at the bondline and maintains dimensional stability throughout the curing process.
Bleeding-Free Performance
Hardens without bleeding when properly placed, yielding high effective bearing area for optimal load transfer.
Strong Pull-Out Resistance
Exceeds 5,000 lbs pull-out resistance at one hour for reliable anchor bolt and post installations.
Recommended Applications for SikaGrout-110 AN
SikaGrout-110 AN is engineered for contractors and engineers tasked with structural anchoring and equipment grouting applications where rapid strength development and reliable performance are essential. Its pourable consistency and cure profile make it especially suitable for anchor bolts, railings, and general grouting applications where installation efficiency must be maximized.
Ideal Applications Include:
-
- Railings and handrail systems
- Anchor bolt installations
- Posts and column bases
- Equipment baseplates under normal loads
- Structural columns and supports
- Seating bolts and hardware
- Reinforcing rod connections
- Power line stanchions and utility structures
Technical Specifications – SikaGrout-110 AN
Rapid-setting grout and anchoring cement for concrete and masonry applications.
8,000 PSI Ultimate Strength
1,500 PSI at 1 Hour
ASTM C 1107 & CRD-C-621
10-12 min Placement Time
ASTM C 1107 Class B & CRD-C-621
Rapid 15-Minute Set
Shrinkage Compensated
Only Add Water
Frequently Asked Questions
What is the minimum clearance for SikaGrout-110 AN?
It is designed for clearances of 1/4 inch (6 mm) minimum. For extended aggregate applications, minimum clearance increases to 1/2 inch (13 mm).
How long before the installation can bear load?
Under typical conditions at 70°F, it reaches 1,500 psi in 1 hour. Do not attach nuts or apply loads for 90 minutes to ensure proper cure.
What temperature range can it be used in?
Use between 40°F (4°C) and 90°F (32°C) for optimal performance and cure characteristics.
What type of surface preparation is required?
For concrete: clean, sound, and dampened to saturated surface-dry (SSD) condition. For anchoring holes: drill 3 times the diameter of the anchor bolt with minimum 1/4″ clearance.
How is it mixed and applied?
Add approximately 2.3 fl oz of potable water per pound of powder. Mix mechanically for no longer than 3 minutes. Pour from one side to ensure complete fill and avoid air entrapment.
What’s the shelf life and packaging?
One year in original, unopened 50 lb (22.6 kg) pails when stored in cool, clean, dry conditions.
Need Help Choosing the Right Cement Grout?
We’re here to answer all of your questions about cement grout solutions, product compatibility, and application techniques. Get expert guidance for your specific project needs.
Professional Grade Products
Quality Customer Service
Technical Support
