Euco Pre-Cast Grout is a high-performance, non-shrink cementitious grout specifically engineered for critical structural applications where exceptional strength, positive expansion, and non-staining characteristics are essential. This precision-formulated grout contains only natural aggregate and an expansive cementitious binder, eliminating the risk of chloride-induced corrosion while delivering reliable long-term performance. With its free-flowing consistency and controlled expansion properties, it ensures complete void filling and full structural support in demanding precast and structural applications.
Designed for contractors and engineers who demand consistent results, Euco Pre-Cast Grout achieves impressive compressive strengths of 8,000 psi at 28 days while maintaining positive expansion throughout the curing process. Its non-metallic formulation provides superior durability and appearance characteristics, with a natural aggregate composition that closely matches surrounding concrete. The grout’s controlled setting time of 40 minutes initial set allows for proper placement and finishing, while its two-year shelf life ensures reliable performance when stored properly.
✨ Looking for a different cement grout?
We’re here to answer all of your questions about cement grout, or any of the other products we carry.
Key Features of Euco Pre-Cast Grout
- High Compressive Strength
Achieves 8,000 psi compressive strength at 28 days with excellent early strength development reaching 4,000 psi in just 24 hours. - Non-Shrink Performance
Provides positive expansion of 0.07% at 28 days, ensuring complete contact and full structural support without settlement or shrinkage. - Non-Staining Natural Aggregate
Contains only natural aggregate materials that provide superior appearance and eliminate staining concerns in exposed applications. - Controlled Setting Time
Initial set in 40 minutes with final set in approximately one hour, allowing adequate working time for proper placement and finishing. - Chloride-Free Formulation
Contains no added chloride ions, protecting reinforcing steel from corrosion and ensuring long-term structural integrity. - Excellent Flowability
Achieves 100% flow rate on flow table testing, ensuring complete void filling and easy placement in tight spaces and complex geometries.
Recommended Applications for Euco Pre-Cast Grout
Euco Pre-Cast Grout is specifically formulated for structural applications where high strength, dimensional stability, and long-term performance are critical. Its non-shrink properties and controlled expansion make it ideal for load-bearing connections and structural interfaces that require permanent, reliable support.
Ideal Applications Include:
-
- Precast concrete panel connections
- Structural support installations
- Column base plates and connections
- Bearing pad installations
- Structural steel connections
- Equipment foundations requiring high strength
- Critical grouting applications in commercial construction
Technical Specifications – Euco Pre-Cast Grout
Non-shrink, non-metallic grout with comprehensive performance data for pre-cast panels and structural applications.
8,000 PSI Ultimate Strength
0.42 ft³ Coverage per 50lb bag
Non-Shrink Positive Expansion
40 min Initial Set Time
Non-Staining Natural Aggregate
High Strength & Durability
Chloride-Free Formula
Frequently Asked Questions
What is the recommended mixing ratio for Euco Pre-Cast Grout?
Mix each 50 lb bag with 0.75 gallons of clean, potable water. This provides approximately 0.42 cubic feet of grout per bag.
How long before the grout can bear load?
The grout reaches 4,000 psi compressive strength in 24 hours and continues to gain strength, reaching 8,000 psi at 28 days for full load-bearing capacity.
What temperature range is recommended for application?
Apply between 50°F and 80°F for optimal performance. Cold weather retards strength gain and set time, while hot weather accelerates setting and can cause premature drying.
Can admixtures be added to modify properties?
No, do not add any admixtures or fluidifiers. The grout is precisely formulated to achieve specified performance characteristics without modification.
What surface preparation is required?
Surfaces should be clean and free from rust, grease, or oil. Saturate the area with water until uniformly damp, then remove excess water just before placing the grout.
How should the grout be stored?
Store in original, unopened packaging in a dry place. Shelf life is two years when stored properly at room temperature.
Need Help Choosing the Right Cement Grout?
We’re here to answer all of your questions about cement grout solutions, product compatibility, and application techniques. Get expert guidance for your specific project needs.
Professional Grade Products
Quality Customer Service
Technical Support
